Specification
Function | 機能 | i 70M Series | |||
---|---|---|---|---|---|
Motor Rating | 馬達出力 | 400W | 500W | 600W | 750W |
Power Voltage Range | 電壓範圍 | Single Phase(單相) : 100 ~ 120V / 200 ~ 240V | |||
Soft Start | 慢速啟動 | ● | |||
Presser Foot Lifter | 押腳提昇 | ● | |||
Trimmer | 切線 | ● | |||
Wiper | 撥線 | ● | |||
Condensed stitch/ Stitch lock/Back-Tacking | 密縫 / 鎖線 / 回縫 | ● | |||
Motor Running Signal (Needle Cooling) | 馬達運轉輸出 | ● | |||
Edge Seneor | 電眼 | ● | |||
IoT Interface | 物聯網介面 | ● | |||
Multi-Pluse Output | 脈衝輸出 | 1 / 36 Pluse | |||
Input Ports | 輸入埠數 | 7 | |||
Solenoid Output Ports | 電磁閥輸出埠數 | 8 | |||
* Gross Weight / 毛重 500W: 8.5 / 600W: 9.0 / 750W: 10.0 Kgs | |||||
* Packing Dimension / 包裝尺寸 460 L x 350 W x 200 H mm | |||||
* Actual weight might be different depend by the varied accessories. 實際重量會依配件的不同而有所差異. |
Model Code - Control Box
Model Code - Motor
Operation Box
C-60 Operation Box
- Stiches are clearly display on the LED.
- Start / End back tacking can be set in 1~15 stiches.
- Patten sewing can be set in 1~99 stiches.
C-200 Operation Box
- Red LED display, bright and clear.
- Start / End back tacking can be set in 1~15 stitches.
- Pattern sewing can be set in 1~250 stitches per section, 13 sections max.
- Bar tacking can be set in 1~15 stitches, 15 sections max.
- Panel multi-fuction key : Definable fuction, 5 functions for selection.
- External mounting DC12V LED light available.
- Parameter setting fuction.
- Built-in memory, save and backup your setting.
Standing Operation Pedal
- SOP-6,Three pedals design for speed, trimmer and foot lifter function.
- Smoothly speed change from low to high.
- Adopt to standing operation, increase sewing eficiency.